|
Q: Why the boot devices CD-ROM/HDD can not be detected or show up in the Boot Menu?
|
|
A: Please check the jumper on your CD-ROM or HDD. If it is the only device in the IDE channel, it must be set to "master". If there are two devices in the IDE channel, the boot device must be set to "master" and the other one "slave".
|
|
|
|
Q: When use two CPUs, do the two CPUs have to be the same?
|
|
A: Yes. The CPUs must be the same speed and same stepping
|
|
|
|
Q: Does 9136 V2 supports Xeon CPU with 2MB L2 Cache ?
|
|
A: Yes, but the BIOS should be v1.31 or later version.
|
|
|
|
Q: What type of cpu does 9136 supports?
|
|
A: It supports Dual Xeon (FSB 800MHz) processors in the 604-pin package 1MB L2 cache
|
